How to Change an Incorrect Phase Number in Advance Steel

 

Advance Steel 2018 Incorrect Phase Numbers

ISSUE

Here is the dilemma, you have created a structure in phases and notice that some elements of the structure don’t reflect the phase. In fact, the piece marks are displaying the wrong phase number in the Model browser and the drawings they were created on.

What do you do, certainly not renumber the entire structure?

Advance Steel allows you to remove the numbering and information from the problematic elements using the Toggle switch display SP/MP tool located on the Output tab, Part marks panel.

 Advance Steel 2018 Output Part Marks

SOLUTION

1. Select the elements in the structure with the problematic piece marks.

2. Select theAdvance Steel 2018 toggle switch display SP MPToggle switch display SP/MP. This removes the marks for the single and main part marks of the selected elements.

3. Then select the third icon to delete theAdvance Steel 2018 delete iconSP/MP piece marks. Keep in mind that If you do not select any elements, the numbers of all the parts in the entire model structure will be deleted.

Take note that parts with the same mark are managed internally as a group. If the mark of a part is changed, then all the other part marks within a group will change.

To avoid this, use the Un-group identical parts icon.Advance Steel 2018 un group identical partsThis tool extracts parts from such a group.

4. Select the middle icon Un-group identical partsAdvance Steel 2018 un group identical parts to remove and ungroup the pieces.

5. Renumber the selection using the same numbering process, however change the: Process Preliminary mark Start from 1 to 3

6. Change the Process single parts Start from 1 to 3

7. Change the Process assemblies parts Start from 1 to 3

8. Select OK.

For this example, the Assemble drawing,1CA565, the first number should be the phase, the second number should be the Mainpart prefix for the column then the counter for the element. However, the phase should be reading 3CA565 not 1CA565.

Watch the video below to see how you can change incorrect phase numbers:

If you are interested in Advance Steel Training or have any questions, contact us at 1-800-724-5678 #0

 

How to Change the Slope Dimensions to Display in I...
How to Change an Incorrect Phase Number in Advance...

Related Posts

Autodesk gold partner 250